Setting up Port Security Port security is a way to lock down what devices can plug into your switch, or how many devices can plug in. This prevents users from putting switches on their own lines. It is possible to use a specific MAC address and if a new device is plugged in, it will ..
Category : Security
Configuring Passwords on a Cisco Switch The first time you attempt to Telnet, you will be denied because no passwords have been set. Passwords must be set via the terminal: Sw1>enable Sw1#conf t Sw1(config)#enable password PassWord Test the new password by exiting back to User Mode, then attempt to enter Privilege mode. Sw1(config)#exit Sw1#disable Sw1>enable ..
Recent Comments